Products Hyper QXchanger™ Dry Cooler CRAH Fan Wall Rear Door Heat Exchanger Heat Path Company Contact Request a Quote

Fan coil wall

Fan Wall
N+1 EC fan array.

EC fans and a chilled-water coil in one unit. Units install side by side in the gallery, become part of its wall, and serve the hall through an open return and open supply. Each unit holds full airflow with one fan out of service.

Capacity
425 kW class
Redundancy
N+1
Access
Gallery side
Fan wall assembly

How it works

Part of the gallery wall.

The fan wall forms part of the gallery partition. Hot-aisle air returns through the coil, and the fan array pushes cooled air straight into the hall. No ductwork, no plenum.

Modular EC array

Airfoil EC fans with 0-10 V speed control, arranged as an array.

One fan out, full airflow

Holds full airflow with any single fan out of service.

Gallery-side access

All service access from the gallery, through hinged fan doors.

Splits to install

The unit splits into sections for rigging into the gallery.

Performance

425 kW class
per unit.

QXH093C, the 7-fan unit. Rated 572.7 kW gross total coil capacity at the hot-aisle conditions shown.

ModelQXH093C
Airflow60,000 ACFM
Entering air102.0 °F DB / 71.5 °F WB
Chilled water63 °F in / 76 °F out, 302 gpm
Net of fan heat555.2 kW
Fans7 x EC airfoil, N-1 at 100% airflow
H x W x L128.2 x 132.2 x 56.2 in
Shipping weight4,905 lb
FiltersMERV 10, 4 in pleated
Electrical480 V / 3 ph / 60 Hz
Basis0.20 in external static, 738 ft site altitude

Construction

Shared with
the CRAH line.

Same casing, coil and controls platform as the QX CRAHs.

See the CRAH line
ArrangementOpen return, open supply; gallery installation
FansAirfoil EC fans, 480 V / 3 ph / 60 Hz, 0-10 V control
CoilCopper tube, aluminum fin, copper header, galvanized casing
Casing18 ga G90 galvanized outer panel, black powder coat; 24 ga galvanized liner; 2 in R-8 insulation
AccessHinged fan doors, all from the gallery side
ControlsTouch-screen controller; BACnet IP, Modbus via gateway

Talk to QX Dynamics.

Tell us about your project and we'll get back to you.